Yamaha Exciter 340/440 (1976-1977) Keihin Float Bowl O-ring Set

Description

Yamaha Exciter 340/440 (1976-1977) Keihin Float Bowl O-ring Set.  These replace the Yamaha part number
93210-72310-00
O-ring and Yamaha 8A6-14147-00-00 O-rings.  These will fit the Keihin PW42-38 Carbs.  This set includes 2 o-rings needed to rebuild/reseal the float bowl.  These are aftermarket, not OEM yamaha parts.  They will fit the stock 1976-1977 yamaha exciter 340 and 440 carbs.  The yamaha part numbers are no longer available.  The float bowl gasket o-ring is a round o-ring, not a formed shaped gasket. These rings are a hair thicker than OEM, but work great. I use them on my own sleds and have done the sourcing legwork for you. I had to put this listing under the coin section/category in order for a proper shipping option to become available. They are not commemorative coins, they are the o-rings as described above.
Installation of the float bowl gasket is super easy with some super glue (not included).  Start in any corner and apply a very thin amount of super glue in the groove the o-ring sits inside.  Then insert o-ring and hold it in place for 15 seconds until the glue sets.  Move onto the next adjacent corner and repeat the process until all corners are done.  Don't stretch the o-ring.